點擊圖片查看原圖
|
|
| Meter/roll | Burst pressure | Burst pressure | Burst PSI | Burst PSI | |
PU0320-200M | 3 | 2 | 200 | 34 | 19 | 435 | 270 | |
PU0425-200M | 4 | 2.5 | 200 | 38 | 21 | 492 | 305 | |
PU0530-200M | 5 | 3 | 200 | 37 | 21 | 480 | 297 | |
PU0640-200M | 6 | 4 | 200 | 31 | 17 | 401 | 251 | |
PU0840-100M | 8 | 4 | 100 | 48 | 25 | 633 | 363 | |
PU0850-100M | 8 | 5 | 100 | 32 | 19 | 414 | 268 | |
PU0855-100M | 8 | 5.5 | 100 | 28 | 16 | 365 | 219 | |
PU0860-100M | 8 | 6 | 100 | 21 | 11 | 295 | 162 | |
PU1065-100M | 10 | 6.5 | 100 | 31 | 18 | 392 | 286 | |
PI1075-100M | 10 | 7.5 | 100 | 26 | 15 | 335 | 216 | |
PU1280-100M | 12 | 8 | 100 | 31 | 17 | 405 | 248 | |
PU1295-100M | 12 | 9.5 | 100 | 24 | 14 | 313 | 203 | |
PU1410-100M | 14 | 10 | 100 | 20 | 11 | 255 | 159 | |
PU1612-100M | 16 | 12 | 100 | 17 | 10 | 216 | 135 | |
PU1611-100M | 16 | 11 | 100 | 24 | 14 | 315 | 205 | |
PU1/8”-200M | 1/8" | 0.066" | 200 | 43 | 24 | 585 | 355 | |
PU3/16”-200M | 3/16" | 0.188" | 200 | 35 | 19 | 455 | 275 | |
PU1/4”-200M | 1/4" | 0.17" | 200 | 34 | 15 | 435 | 210 | |
PU3/8”-100M | 3/8" | 1/4" | 100 | 31 | 17 | 408 | 252 | |
PU1/2”-100M | 1/2" | 0.32" | 100 | 34 | 17 | 438 | 242 | |
靜態水爆破壓力測試75°F&140°F BURST TEST.HYDROSTATIC WATER PRESSURE75°F&140°F
PERFORMANCE DATA(性能數據）:
1)氣體溫度范圍：-40 ℃ ~ +80 ℃ （非化學氣體空間）
液體溫度范圍：-15 ℃ ~ +60 ℃ （無結冰條件下）
Temperature and the working environment (temperature): -40 ℃ ~ +80 ℃ (non-chemical gas space)
Fluid temperature range: -15 ℃ ~ +60 ℃ (not ice over)
2)公差范圍：± 0.1mm ~ ± 0.15mm Diameter tolerance: ± 0.1mm ~ ± 0.15mm
3) 硬度：邵氏95A / 98A （根據不同的季節和區域來選擇）
Hardness: Shores 95A / 98A (according to season and region)
4) 抗張力強度：400kgf/cm2 (5690 PSI) Tensile strength: 400kgf/cm2 (5690 P
5)抗張力強度：400kgf/cm2 (5690 PSI) Elongation limit: 490-590%
6)耐磨損度：35mg Resistant to wear and tear of: 35mg
7)撕裂強度：110kg/cm2 (1565 PSI) Tear strength: 110kg/cm2 (1565 PSI)
8) 爆破壓力與長時間工作壓力安全系數比例為：3:1 Blasting pressure and the pressure to work long hours for the safety factor ratio: 3:1
9)相當小彎曲半徑 Minimum bending angle:
3 * 2-12 ℃ ；4 * 2.5-12 ℃ ；5 * 3-33 ℃ ；6 * 4-35 ℃ ；8 * 5-39 ℃ ；8 * 5.5-46 ℃ ；10 * 6.5-43.5 ℃ ；10 * 7.5-42 ℃ ；12 * 8-37 ℃； 12 * 9.5-54 ℃ ；14 * 10-70 ℃ ；16 * 12-70 ℃。
SUPERIOR FEATURES（優良特性）:
? excellent flexibility. 極好的柔韌性。
? bend radius less resistance around the song. 彎曲半徑小，耐繞曲。
? high elastic recovery memory effect. 高彈性，回復記憶效應。
? resistant to wear and tear, impact. 耐磨損，撕裂，撞擊。
? part of the resistance can not corrosive chemicals and oils. 可抵抗部分無腐蝕性化學物及油類。
? Resits fuels and can be spliced. 可流通易燃性物體，能熔接。
? 100% incineration. approved by scientific Eoology Group.
能100%焚化成灰，是認可的環保產物。
MATERIAL DEscriptION (材料說明）
Thermoplastic resin-amino acid (commonly known as TPU) is contained by the NCO functional groups of MDI and contain OH functional groups of polyol, extending from the mixing of extrusion, with amino acid lipid gene polymers.
熱可塑性聚氨基甲酸脂(俗稱TPU)是由含有NCO官能基之MDI及含有OH官能基之多元醇，延長劑擠出混煉而成之，具有氨基甲酸脂基因的高分子化合物。
具有出色的耐磨損，抗刮擦傷性，具有較高的抗拉強度和伸長率，以及較強的抗穿刺性和抗撕裂性、抗沖擊性。符合歐美環保要求，獲SGS認證，***，對人體無害。