下面的內容是對于12PSB-III噴油泵試驗臺的使用注意事項闡述，所展示的噴油泵試驗臺都是現場拍攝，提供的內容都是經過精達動力機械制造廠液壓泵試驗臺廠家經驗所得，請點擊進入查看更多高壓共軌噴油器試驗臺的相關行業信息吧。

高壓共軌噴油器試驗臺、噴油泵試驗臺 12PSB--III JD--III找鄒經理 一三八五四八二二三九五（屏顯數顯型）

噴油泵試驗臺12PSB-III的特點：普通CRT屏，電腦顯示和數顯！

TLD-III屏顯數顯試驗臺詳細介紹：

1 測試不同轉速下的各缸供油量

2 靜態檢查各缸供油的時間

3 檢查調速器性能

4 分配泵電磁閥的試驗

5 檢查氣動調速器性能

6 檢查增壓補償器性能

7 檢查分配泵的輸油供油能力

8 測量分配泵泵體內壓

9 檢查氣膜調速器負壓性能

10 進行噴油泵的密封性試驗

11 測量提前器提前角度

12 數據庫（可選）

13 打印功能（可選）

14 齒桿行程（可選）

15 可調試國內外各類直列泵、分配泵

噴油泵試驗臺屏顯數顯試驗臺技術參數（LP、I、II、III、Z型）

１.操作位置：兩側；

２.量筒：45ml一套；

３.燃油箱容積：60升；

４.油量自動控制： 40℃±2℃

５.試驗油濾清精度： 5u；

６.直流電源: 12V、24V；

７.數字顯示:轉速、計數、油溫、提前角；

８.機械表顯示：高低油壓ＶＥ內壓、正負氣壓；

９.供油壓力： 低壓0-0.4Mpa 高壓0-4Mpa；

10.VE1壓力:0-0.16 VE2壓力:0-1.6

11.供氣壓力： 正壓0-0.3Mpa 負壓0-0.04Mpa；

12.轉速預置：10檔預置 0-4000rpm；

13.電源：380V/50Hz (可根據要求)；

14.總尺寸： 2100×900×1600mm

15.凈重：1000kg

16.中心高：125mm

17.飛輪慣量：0.8kg㎡

High pressure common rail injector test bench, fuel injection pump test bench 12psb--iii jd--iii find manager Zou 13854822395 (screen display digital display)
Features of fuel injection pump test bench 12psb-iii: ordinary CRT screen, computer display and digital display!
Detailed introduction of tld-iii screen display digital display test bench:
1 test the fuel supply of each cylinder at different speeds
2. Statically check the oil supply time of each cylinder
3 check the governor performance
4 test of distribution pump solenoid valve
5 check the performance of pneumatic governor
6 check the performance of boost compensator
7 check the oil delivery capacity of the distribution pump
8 measure the internal pressure of the distribution pump
9 check the negative pressure performance of the gas film governor
10. Conduct the sealing test of the fuel injection pump
11 measure the advance angle of the advancer
12 database (optional)
13 printing function (optional)
14 toothed rod stroke (optional)
15. It can debug all kinds of in-line pumps and distribution pumps at home and abroad
Technical parameters of fuel injection pump test bench screen display digital display test bench (LP, I, II, III, Z type)
1. Operation position: both sides;
2. Measuring cylinder: one set of 45ml;
3. Fuel tank volume: 60L;
４. Automatic oil volume control: 40 ℃ ± 2 ℃;
５. Filtering accuracy of test oil: 5u;
６. DC power supply: 12V, 24V;
7. Digital display: speed, counting, oil temperature, advance angle;
8. The mechanical meter shows: high and low oil pressure ve internal pressure, positive and negative air pressure;
９. Oil supply pressure: low pressure 0-0.4mpa, high pressure 0-4mpa;
10. VE1 pressure: 0-0.16 ve2 pressure: 0-1.6
11. Air supply pressure: positive pressure 0-0.3mpa, negative pressure 0-0.04mpa;
12. Speed preset: preset 0-4000rpm for 10 gears;
13. Power supply: 380v/50hz (according to requirements);
14. Overall size: 2100 × nine hundred × 1600mm
15. Net weight: 1000kg
16. Center height: 125mm
17. Flywheel inertia: 0.8kg ㎡

英文由百度翻譯，僅供參考。